Abstract:
To address the load-bearing performance of mesh-formwork cast-arch single-shell linings in tunnels in soft surrounding rock, a three-dimensional numerical model was established using finite-difference software, taking the Yinggeling Tunnel in Hainan as the engineering background. The mechanical responses of the mesh-formwork cast-arch structure and the New Austrian Tunnelling Method (NATM) shotcrete structure were simulated under Grade V surrounding rock conditions during staged excavation, and the evolution of the surrounding-rock displacement field, the stress histories at key locations, and the final convergence were compared and analyzed. The results show that: compared with the NATM shotcrete structure, the surrounding rock displacement of the mesh-form structure converges more compactly, and the plastic zone does not form a circumferential penetration, achieving a transformation from passive adaptation to active locking of the surrounding rock; after excavation and unloading, the stress adjustment of the surrounding rock is gentle, and there is no significant low-level relaxation at key positions, with the initial stiffness established earlier; the initial slope of the stress-displacement curve at the arch crown is relatively steep, showing an obvious early-strength characteristic; the arch bottom relies on the overall longitudinal integrity to form a rigid closed reverse arch, which locks the displacement of the floor in the early stage and effectively curbs the continuous development of floor heave.The research results can provide a theoretical basis for the design and construction of single-layer lining in tunnels with soft surrounding rock.