搜索

x

超临界雷诺数下圆柱气动力的吸气流动控制数值研究

Numerical investigation of suction-based flow control for circular cylinder aerodynamics at supercritical reynolds numbers

  • 摘要: 针对超临界雷诺数下圆柱吸气流动控制减阻规律及临界吸气法向角尚缺乏系统认识的问题,本研究采用三维大涡模拟方法,对超临界雷诺数下圆柱气动力的吸气流动控制进行了数值研究,分析了吸气速度与吸气法向角对圆柱气动力的影响。结果表明:主动吸气能够显著改善圆柱气动荷载,减阻效果随吸气速度提升呈现先增强后减弱的变化规律,过大吸气量会引发剪切层失稳,反而造成阻力增大;吸气流动控制性能受吸气法向角影响显著,仅在一定角度区间内能够稳定约束剪切层,角度超过临界阈值后控制机制失效,气动阻力急剧增大。

     

    Abstract: To address the insufficient understanding of the drag-reduction characteristics and critical suction normal angle of suction control for a circular cylinder at supercritical Reynolds numbers, three-dimensional large eddy simulation was employed to numerically investigate suction-based aerodynamic flow control of a circular cylinder. The effects of suction velocity and suction normal angle on the aerodynamic forces of the cylinder were analyzed. The results show that active suction can significantly improve the aerodynamic performance of the cylinder. The drag-reduction effect first increases and then decreases with increasing suction velocity, and excessive suction induces shear-layer instability, resulting in an increase in drag. The performance of suction control is also strongly affected by the suction normal angle. The shear layer can be stably constrained only within a certain angular range; once the angle exceeds the critical value, the control mechanism fails and the aerodynamic drag increases sharply.

     

/

返回文章
返回